
HSC Elite 110 Volt HEPA 13 Air Scrubber
HEPA H13 Filtration
High-Volume Displacement
Runs on 110V job-site power
Features a dial-adjustable variable speed controller
Hard rubber protective housing
Pre-Filter Included
HSC Elite 110 Volt HEPA 13 Air Scrubber
The HSC Elite 110 Volt HEPA 13 Air Scrubber is ideal for cleaning room air quickly and effectively. Operated by a 200W radial fan, this unit removes contaminants from the air and circulates it through an efficient filter before releasing the purified air back into the room. It circulates approximately 1,240 m³ of air per hour. The scrubber is lightweight and easy to carry around, but the design is rugged enough to handle the demands of workshops and the like.
Powered by a standard 110V power supply, this unit is incredibly easy to use with simple controls. It features a variable speed switch to control the airflow depending on the area. Optimal operating temperatures range from -15°C to +40°C, making it ideal for all seasons and weather conditions. Using this air scrubbing in combination with either site heaters or air conditioners keeps the indoor climate cleaner and improves the connected ventilation.
Features & Benefits: HSC Elite 110 Volt HEPA 13 Air Scrubber
Superior Filter: Designed with a HEPA 13 air filter to capture at least 99.75% of particles with a diameter greater than 0.3 Microns.
Controlled Airflow: The variable airflow control determines the noise levels depending on the working area, making the unit run quieter or louder.
Plug Power: Fitted with a standard 110V plug to connect to transformers or power outlets.
User-Friendly Design: The profile of this unit allows for easy transportation and storage.
Cleaner Air on Worksites
Construction work generates a lot of dust and debris, which is amplified indoors. This is hazardous for workers as it creates unsafe breathing conditions. This air scrubber clears the air of microscopic debris and strips out 99.75% of airborne particles. Improve the quality and purity of the air in working environments by running this air scrubber continuously.
Simple Power Supply
Fitted with a 16-amp yellow plug that is powered by a 110V feed, this air scrubber is designed specifically for UK sites. It only requires 200 Watts to run and draws a low 2.0 amps, meaning that other tools can be used while this unit is running without the fear of tripping the power. The reliable radial fan operates effectively inside the unit to ensure that the filter purifies the air sufficiently.
Adaptable Filtration
Equipped with a G4 coarse pre-filter as well as a main HEPA 13 filter, this unit catches nearly everything in terms of standard dust and general clean-up. For stronger odours such as paint fumes and solvent odours, an active carbon filter can be fitted into this unit. An H14 HEPA filter can also be used for extreme filtration.
Voltage: 110 Volt
Power Output: 200 Watts
Current Draw: 2.0 Amp
Air Displacement: 1,240 m³/h
Fan Type: Radial
Speed Control: Variable Dial
Included Primary Filter: HEPA 13 (Captures 99.75% @ ≥0.3 microns)
Included Pre-Filter: G4 Pre-Filter
Optional Filters: HEPA H14, Active Carbon
Input Plug: 16 Amp (110V site plug)
Power Cord Length: 5.0 Metres
Working Temp Range: -15°C to +40°C
Air Inlet Diameter: 24.0 cm
Ducting Diameter: 25.0 cm (Ducting optional)
Ingress Protection: IP42
Dimensions (L x W x H): 60.0 cm x 36.5 cm x 56.5 cm